New
Arrivals/Restock
Seco-Larm NR-P401E-TQ Gigabit PoE Extender, 1-Input to 4-Outputs
4.8 (59 items)
Limited Time SaleUntil the end
11
36
59
$29.40 cheaper than the new price!!
Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Free cash-on-delivery fees for purchases over $99
See all stores
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New $58.80
Product details
| Management number | 205071554 | Release Date | 2025/10/16 | List Price | $29.40 | Model Number | 205071554 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
The ENFORCER Gigabit PoE Extenders connects PoE cameras, IP access control, IP speakers/intercoms, IP telephony, or other PoE devices using a single Cat5e or
Cat6 cable to extend data and power by an additional 328ft (100m), for a total range of up to 984ft (300m) with two extenders. The NR-P401E-TQ supports up to 4 PoE devices.
- Extends the range of PoE Ethernet devicesover Cat5e or higher cables an additional 328ft (100m)
- Connects 10,100,1000BaseT PoE devices including IP cameras, IP access control, VOIP, IP speakers/intercoms, etc.
- Supports up to gigabit transmission rates
- Passive operation – no external power required
- Easy plug-and-play installation
- Compliant with IEEE802.3af, IEEE802.3at
- Automatically detects PoE equipment and protects from damage due to faulty installation
- 4 Output ports for up to 4 PoE devices
- Also compliant with IEEE802.3bt 4 pairs
Specifications
| Connections: PoE In | 1x Shielded RJ-45 |
| Connections: PoE Out | 4x Shielded RJ-45 |
| PoE Power: Input | Up to 60W |
| PoE Power: Output | Up to 55W (total for 4 ports) |
| Transmission range: 1 Extender | 656ft (200m) |
| Transmission range: 2 Extenders | 984ft (300m) |
| Data link | Both pin 1/2, 3/6 and 4/5, 7/8 |
| Power link | Pin 1/2(+), 3/6(–) up to 12W for 4 PSE, 25W for 2 PSE |
| Network cables | Shielded Cat-5e or higher |
| Ethernet speed | 10/100/1000 Mbps half/full duplex |
| PoE standard | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt 4 pairs (60W) |
| LED Indicators: Power link | Yellow |
| LED Indicators: Data link | Green, steady |
| LED Indicators: Data transmit | Green flashing |
| IP rating | None |
| Operating humidity | 90% (maximum, non-condensing) |
| Operating temperature | 14°~113° F (-10°~45° C) |
| Dimensions | 4-11/16″x1-1/8″x3-3/8″ (119x28x85 mm) |
| Weight | 8.8-oz (250g) |
Troubleshooting
| PoE device doesn’t function properly | • Ensure that all devices are turned on • Ensure that the PoE device is functioning by plugging it directly into the PoE switch, computer, etc. • Double-check that the cables were connected properly • Run a continuity test on all wires in the cable • Equipment at both ends must be at the same link speed, 10BASE-T with 10BASE-T, 100BASE-T with 100BASE-T, etc. • Replace with a higher-grade cable for better performance • Ensure that the cable lengths are within the allowable range and consistent with the remote PoE device power consumption, and reduce cable length as needed • With 1000BASE-T, power consumption is greater, so no more than 2 PoE extenders may be used • Check that power consumption is within the specifications |
Network Accessories
Bottom Brackets
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form